Exocubic Studio

CinderCone: A Story in 6 Chapters

Patternz...

Chapter 1:

Chapter 2:

Chapter 3:

Chapter 4:

Chapter 5:

The Final Chapter:

Fire tools.

Laser cut, hand-built, stainless steel.

Still flogging the CinderCone #chimenea and fire tools. Holler if you want to get your mitts on one.

CinderCone bottom bits, CAD model in Rhino3d.

Symbol Sconces.

Fire tools! Single tools from $125, set of three $450. Trio with the tool garage (best deal): $595. 11 gauge stainless steel and 3/8" hexagonal rod.

Aww, put that turtle back on his feet!

Fire Tools: Fabrication.

Some process shots of building the tools.

Shovel and Hook.
Hook detail.
Tool trio.
Handle detail.
Tool storage: the
Fire tools in the hive.

 

 

 

Fire Tools.

Once I decided the CinderCone required an ash door to clean out the fire basin, it was pretty self-evident that some tools to facilitate the process were in order. That, and my own set of tools was pretty homely and long in the tooth. I elected to run with the hexagon motif and stick with solid stainless for the material.

Poker/hook.

The Poker/Hook. Went with hexagonal rod for the shaft to really drive home the idea that Hexes Are Awesome. ^

Shovel.

Shovel. 11 gauge stainless steel scoop with tab and slot construction. ^

Tongs.

And… the tongs. Challenging design, but worth it. ^

-------------------

With the tools designed, I realized they needed a place to live — one that complimented the CinderCone but was capable of standing on its own, too:

Tool storage unit.

A “garage” to store the tools. The Hive!

CinderCone with fire tools. Available as a bundle.

Fire tools(tongs, poker, shovel) with their storage garage "hive." Available now as a set for $595.

CinderCone.

Just some FANTASTIC shots of the completed Version 2.0 by Jafe Parsons. Careful — you might get awesome on ya.

CinderCone door.

CinderCone feet.

CinderCone door detail.

CinderCone pattern detail.

CinderCone glamour shot.

CinderCone: Making V2, Part 2.

With the fire basin pretty much finished, time to tackle the upper section - the place where all the magic happens. These faces are where the cutouts reveal the fire through a pattern of flowing, distorted hexagons - giving CinderCone its unique look.

 

With the “belt line” brackets all welded together into a rigid ring, they can serve as a jig for aligning the patterned faces. I built a fancy fixture to hold adjacent faces while tacking their tops.

 

Adding the faces

 

Bolting the bottoms and tacking the seams is a pretty quick, straightforward proposition.

 

Belt line

 

Stitch welding.

Stitch welding the seams - an inch of weld, skip 3 inches, then another inch of weld. Lowers the amount of heat applied while allowing a bit of flexible relief for the strain of the heating/cooling cycle.

 

Bending the

On to the hardest part fo the whole process: the “eyebrow” over the fire door. All the other parts are just welded together in their flat state; the is one needs to formed into a curve. Hydraulics to the rescue!

 

Eyebrow attached.

The Eyebrow. Attached.

 

Finished upper section.

With that, the upper section is finished.

Aha! Well, that answers THAT burning question.

Upside down CinderCone? Door in an alien spaceship?

Jeez, is that enough yet?

CinderCone: Making V2.0

Now that I’ve figured out how to correct the issues that presented themselves in V1, it’s time to implement the changes. That means generating new patterns for the laser and having the improved design cut. I also went with slightly thicker material — 11 gauge instead of 12 — to provide a touch more rigidity. Let the games begin!

CinderCone faces render.

The updated upper faces. Here you can see the threshold below the door, and the updated trio of fastener holes in the bottom of each face. ^

Laser cut metal.

Voila! The laser-cut metal in all its glory. ^

Bottom plate and fire basin faces.

The bottom plate and fire basin faces. ^

Bracket 3d model

The 3D model of the new & improved anchoring bracket… ^

Bracket

… and its real-world counterpart. ^

Brackets bolted into basin.

To insure a proper fit, I bolt the brackets into the fire basin and tack them together while there. Here, you can see how the ring of brackets pins the grill in place. ^

Brakcet ring on fixturing table.

Once tack welded, the brackets are removed, clamped securely flat, and the final welds added. Oh - about that work surface: I was massively frustrated with how my fixturing and clamping setup worked on the prototype, so I broke down and bought a fancy German fabrication table. I really only spend money on things that make making better. ^

That’s the first half of the assembly for version 2. I’m really pleased at how the design is working out, and the new welding table not only makes things easier, but insures that the quality of my parts is top notch.

Fire tools are finished up and getting their school pictures taken. Will have them up on my store shortly.

CinderCone: Back to the Drawing Board.

With lessons learned from the first burn trial-by-fire (literally), I went back into my model on the computer and started implementing improvements. Chief among these was a way to stabilize the grill and a better system for attaching the top section to the fire basin. I also wanted to add in an ash door and a way to stiffen up the feet (they had a bit of lateral deflection happening, albeit slight. Might as well fix it while I’m fixing, right?)

 

Belt line in Solidworks

 

The biggest change was adding a “belt” that ran along the entire perimeter of the joint between top and bottom. This kills two birds: the belt pins the grill down to prevent warpage, and provides a super-beefy means of attaching top to bottom. You can also see how I extended the bottom plate further out on the legs to stiffen them up.

 

Belt section

 

Detail of one section of the “belt.” I used tab and slot construction to spare me the hassle of alignment, plus it adds strength. Note the hexagonal cutouts that receive the nuts. Magic.

 

Belt complete model

 

The CinderCone’s “Belt.”

 

CinderCone V2 design

 

The finished V2 design. I added a bit of a “threshold” under the door to allow for a full 360° of attachment, top to bottom.

Fire tool trio keeping my sculpture "Beginning" company on a Sunday afternoon.

A shot of the fire tool trio. All for one, and one for all! Only, without the muskets. Or bad French accents.

CinderCone: First Burn.

With the welding and sanding and bolting all finished up, it’s time to test this thing out. My dear friends Bruce and Cyndi volunteered their beautiful property on the lake for a test site, and, once a day with cooperative weather materialized, it was time.

What an amazing evening! Couldn’t have been happier with how the CinderCone performed — and the visual effect of the cut-out pattern when combined with the dancing flames was nothing short of spectacular. We stoked the flames MUCH more than required to have a nice fire in order to stress-test the design. Glad we did, as it revealed some structural shortcomings that would need to be addressed before offering these up for sale.

Metal may seem like a solid, stable material — one that you can rely on to hold its shape and remain true to itself under stress. In reality, it is subject to all kinds of movement when subjected to heat. These thermal stresses need to be countered to maintain the integrity of the object.

The aftermath of our stress test showed that the outer “shell” of the design handled these forces well — but the grill itself, directly in contact with the source of heat, needed some shoring up. Any welder can tell you that one only need curtail expansion and contraction throughout the heating cycle to minimize warping. The grill was allowed too much freedom in this design, and the forces went to work on it. I needed to do some redesigning, but thought I’d try to retrofit the V1.0 CinderCone before tackling V2.0.

Adding ribs that radiate outward from the center of the grill to add stiffness. Notice the bonus colors provided by the fire!

 

The brackets not only attach the upper section to the fire basin, but they also serve to pin the edges of the grill in place. I fabricated longer brackets to spread this pinning action along the entire edge.

A phalanx of new brackets ready to be installed. You’ll notice that there are only five; the side with the door doesn’t get one, and that proves to be problematic.

 

After a second test fire, you can see just how much force gets applied to the grill, and why the design for the opening is not going to work.</>So, although the overall design was a success, there are some structural details that need improving. Another sticking point was removal of the ash that accumulates beneath the grill. I’d thought that removing the top section and grill would be easy enough to access this area, but adding the longer brackets and their additional fasteners made that too big a hassle. This thing needs an ash clean-out door.

 

On to CinderCone Version 2!

CinderCone: How, Part 2.

Now that the design and layout work is complete, and the laser has done its thing, the real work begins. Or the FUN, depending on your feelings about welding and sanding metal. The interesting thing about my process is just how much of the fit-up and fixturing is simplified by the earlier CAD work — there’s very little guesswork or problem solving left at this point. Photos below tells the story of assembling the first CinderCone prototype.

Cleaning and preparing the raw laser cut parts.

Cleaning and preparing the raw laser cut parts. ^

 

A closer look at the warped hexagonal pattern.

A closer look at the warped hexagonal pattern. ^

 

Welding the attachment nuts into the brackets.

Welding the attachment nuts into the brackets. ^

 

Welding the attachment nuts inot the brackets.

The bracket parts have hex cutouts to accept the nuts. Simplifies positioning. ^

 

A quarter for your brackets

A Quarter for Your Brackets - These brackets will hold the top section to the bottom fire basin.^

 

Hexagonal standoff

These hexagonal standoffs accept the leveling feet. ^

 

Attaching the legs to the base.

Attaching the legs to the base plate. Pretty colors. ^

 

All the legs attached to the bottom plate.

All the legs attached to the bottom plate. ^

 

Bottom basin.

Finishing up the fire basin and adding the brackets. ^

 

Upper section welded up and bolted to the fire basin.

Upper section welded up and bolted to the fire basin.

 

Adding the “eyebrow” above the main door; bending metal of this thickness is never easy.

The Hard Part - Adding the “eyebrow” above the main door; bending metal of this thickness is never easy. ^

 

Clamps.

How many clamps can you fit in there, dude?

 

Finishing touches.

Eyebrow on and grill in place. Just a few final details. ^

Finally finished up the tongs for the fire tool set.

#sculpture #functionalart #metalshaping #metalart #metalartwork #tig #handmade #metalfabrication #metalworking #sheetmetal #maker #weldporn #ckworldwide #tigandchill

Fire tools: poker and shovel. Stainless steel ftw.

#sculpture #functionalart #metalshaping #metalart #metalartwork #tig #handmade #metalfabrication #metalworking #sheetmetal #maker #weldporn #ckworldwide #tigandchill